產品名稱：湘潭大學加壓泵站（1.5萬噸/天）

電子無負壓供水系統裝置工作原理

 電子技術無空氣有壓差集中供暖安裝程序會直接串接在飲水集中供暖管上，在泵漏液端和出水出水端分別是安裝程序有壓差傳調節器器，采集器城市熱力圖有壓差改變無線信號并推入咨詢中心掌握象限。其人體浮堰象限、大概掌握象限、手動伴隨象限、有壓差PID設定象限，經設定中協調性運算設定抽水機組會自動運作。

 網絡VR增強現實浮堰可在展開進暖氣管道中組成第一道VR增強現實浮堰，其意義與真時浮堰相當，其浮堰高寬比可能夠 有效操作開關按鈕敏銳重設，具體操作時有效操作web前沿展開存水目的水壓值總是不低過網絡浮堰重設值，這就有效確保了web前沿自來暖氣污水管等相應朋友不會受真空導致，集中供熱模式設計只對翻越網絡浮堰的儲需發電量展開優酷云疊壓，能夠充分巧用了自來暖氣污水管等原來的水壓值，極限比率的節儉了電，當自來暖氣污水管等因告警誕生來水水壓值及來儲需發電量不充足時，翻越網絡浮堰的儲需發電量再繼續被模式高層供電輸送，以絕對集中供熱的連續不斷性。當翻越浮堰的儲需發電量為零時，專用生產設備半自動式開始機器運轉。當自來暖氣污水管等恢復如初正確只需有翻越浮堰的儲需發電量導致，專用生產設備會半自動式操作高層供電。

因電子廠無負壓力給水管裝置間接串接在給水給水管管上，可以直接省去了老式的汽車水箱，從本質上上防范了水與美觀了解而養成的2次環境破壞。

電子無負壓產品優點

1、 占水平面面積計算小。

2、 汽車涉水組件少、戶型小，光電子調節器組件受不到污垢溶物反應。

 3、 防壓力差的時候可利用來容量數據同步供壓，來多多少錢少加多多少錢少，就只有訪問量為零時才關機。

4、 有效果保護的供水官網中各種壓力免受差壓印象，且人設調整靈活性簡單。

5、 壓縮空氣管串并聯，充沛用了供水浸水壓力差，機使用能力高。

6、 機 是完全通風與豪邁穿透，抓實水體不在污染源。

Working principle of electrical water supplying system device without negative pressure

  The device is directly connected to the tap water supplying pipes with a concatenation, and pressure sensors will be mounted respectively at the water in-let and out-let ends to collect real time pressure alterative signal and send to the central control unit. Its Virtual floating weir unit, fuzzy control unit, automatic follower unit, pressure PID control unit, through the central coordinative calculation, will control the water pump group to automatically work.

 Electrical virtual floating weir can generate a virtual floating weir in water in-letting pipes, its function is equal to real floating weir, whose height can be adjusted smartly through the control panel, its actual motion can sustain the front end water in-letting pressure to be always higher than the value fixed by the electrical floating weir, and thus to ensure that the users surrounding the front end water pipe net won’t be affected by the negative pressure. The water supplying devices only make online overlying of the water quantity that has crossed the floating weir, which has sufficiently taken usage of the original pressure of the water pipe net, thus to save the power as much as possible. When the water pipe net can’t supply enough water or water pressure because of any error, the water crossing the floating weir will be continuously output with additional pressure from the system, thus to sustain continuous water supply. When there is no water crossing the floating weir, the device will stop automatically to accumulate pressure, when the water supply pipe net is recovered, only there is water crossing the floating weir, the device will automatically operate and accumulate pressure.

 Because the electrical water supplying devices without negative pressure is connected directly to the water supplying pipe, the traditional water tank is saved, thus to avoid the secondary pollution from the contact between water and atmosphere.

Advantage of electrical products without negative pressure:

     1、Small area taken.

      2、Less parts and areas interfered by water, electrical sensing parts won’t be affected by incrustation.       3、The negative pressure protective process can accumulate pressure symmetrically as per the incoming water quantity, which only stops when the water flow is zero.       4、Effectively protect the water supply pipe net from being affected by the negative pressure, with smart setting and debugging modes.       5、Pipe line is connected with concatenates, which sufficiently takes advantage of the pressure from incoming water, more efficiency.       6、Device is totally sealed and isolated from atmosphere, thus to avoid pollution.