產品名稱：株洲縣南洲無負壓加壓泵站

電子無負壓供水系統裝置工作原理

 電子設備無差壓集中供熱裝置同時串接在集中供熱集中供熱管上，在水循環泵入水端和出水出水端分別是進行安裝的負荷傳掌握傳感器器，采摘時時的負荷轉變網絡信號并推入重心掌握模塊測試卷尺寸。其虛擬技術浮堰模塊測試卷尺寸、大概掌握模塊測試卷尺寸、自功緊跟模塊測試卷尺寸、的負荷PID把控好模快，經把控好重心溝通運算把控好增壓泵組手動電腦運行。

 系統電腦自動化技術增強現實主機浮堰可在取暖氣管道中轉變成第一道增強現實主機浮堰，其意義與最真實浮堰一樣的，其浮堰的高度可采用抑制表面面板輕松因素，真正運作時抑制前沿取水目的壓差時常不降到系統電腦自動化技術浮堰因素值，這就切實保障了前沿自來暖氣給水管道周遍訪客受到差壓導致，給水裝備只對翻越系統電腦自動化技術浮堰的儲發電量去在線平臺疊壓，全面利用了自來暖氣給水管道已有壓差，非常大頻率的浪費了電力，當自來暖氣給水管道因常見故障產生了來水壓差及來儲發電量過高時，翻越系統電腦自動化技術浮堰的儲發電量立即被軟件系統高層供電導出，以保證質量給水的連繼性。當翻越浮堰的儲發電量為零時，環保裝置系統電腦自動停機使用。當自來暖氣給水管道灰復日常主要有翻越浮堰的儲發電量導致，環保裝置會系統電腦自動運作高層供電。

可能電子元器件無正壓供排水管提升裝置會串接在純凈水供排水管管上，節省了常用的中冷器，從必然上以免 了水與電離層打交道而產生的再次影響。

電子無負壓產品優點

1、 占地賠償戶型小。

 2、 外出控制部位少、體積小，電子為了滿足電子時代發展的需求，調節器控制部位免受污垢硫氰酸鹽決定。

 3、 防壓差操作過程可只能根據來儲水量同歩增壓，來多少個錢加多少個錢，只能訪問量為零時才停止設備運轉。

 4、 可行防護日常自來水污水管道壓強不在空氣壓力的影響，且設計調準利索不方便。

5、 管線電容并聯，有力再生利用了污水漏水水壓，機正常運作速率高。

6、 系統非常密閉式與空氣切斷，保證土質不主環境污染。

Working principle of electrical water supplying system device without negative pressure

  The device is directly connected to the tap water supplying pipes with a concatenation, and pressure sensors will be mounted respectively at the water in-let and out-let ends to collect real time pressure alterative signal and send to the central control unit. Its Virtual floating weir unit, fuzzy control unit, automatic follower unit, pressure PID control unit, through the central coordinative calculation, will control the water pump group to automatically work.

 Electrical virtual floating weir can generate a virtual floating weir in water in-letting pipes, its function is equal to real floating weir, whose height can be adjusted smartly through the control panel, its actual motion can sustain the front end water in-letting pressure to be always higher than the value fixed by the electrical floating weir, and thus to ensure that the users surrounding the front end water pipe net won’t be affected by the negative pressure. The water supplying devices only make online overlying of the water quantity that has crossed the floating weir, which has sufficiently taken usage of the original pressure of the water pipe net, thus to save the power as much as possible. When the water pipe net can’t supply enough water or water pressure because of any error, the water crossing the floating weir will be continuously output with additional pressure from the system, thus to sustain continuous water supply. When there is no water crossing the floating weir, the device will stop automatically to accumulate pressure, when the water supply pipe net is recovered, only there is water crossing the floating weir, the device will automatically operate and accumulate pressure.

 Because the electrical water supplying devices without negative pressure is connected directly to the water supplying pipe, the traditional water tank is saved, thus to avoid the secondary pollution from the contact between water and atmosphere.

Advantage of electrical products without negative pressure:

     1、Small area taken.

      2、Less parts and areas interfered by water, electrical sensing parts won’t be affected by incrustation.       3、The negative pressure protective process can accumulate pressure symmetrically as per the incoming water quantity, which only stops when the water flow is zero.       4、Effectively protect the water supply pipe net from being affected by the negative pressure, with smart setting and debugging modes.       5、Pipe line is connected with concatenates, which sufficiently takes advantage of the pressure from incoming water, more efficiency.       6、Device is totally sealed and isolated from atmosphere, thus to avoid pollution.