產品名稱：第三代電子式無負壓供水加壓設備

電子無負壓供水系統裝置工作原理

 電子器件無負氣壓給水提升裝置間接串接在污水給水管上，在抽水泵接觸不良端和留水端不同安裝程序氣壓調節器器，收集實時交通氣壓變預警并送進去咨詢中心操作單元。其虛擬現實游戲浮堰單元、不清操作單元、自動的跟著單元、氣壓PID管控單元尺寸，經管控重心互相配合運算管控循環水泵組自動式啟用。

 網絡無線虛擬軟件現實游戲浮堰可在泡排污管道中建立道虛擬軟件現實游戲浮堰，其做用與實計存在浮堰相等，其浮堰髙度可使用控住后蓋板靈巧設置，實計作業時控住前沿泡水階段目標學習壓強差不斷不底于網絡無線浮堰設置值，這就保持了前沿自來排污官網中周遍大家中受學習壓強差的影響，集中供熱裝置設配只對超過網絡無線浮堰的出發電量通過免費在線疊壓，做好合理利用了自來排污官網中原先的學習壓強差，較大小幅度的勤儉節約了能耗，當自來排污官網中因錯誤引發來水學習壓強差及來出發電量過高時，超過網絡無線浮堰的出發電量重新被整體后供壓傳輸，以確認集中供熱的多次性。當超過浮堰的出發電量為零時，設配會自動式停此工作。當自來排污官網中醫治常見主要有超過浮堰的出發電量發生，設配會會自動式作業后供壓。

伴隨智能無正壓給水部件會串接在杭州自來水給水管上，減少了老式的發動機水箱，從完全上逃避了水與大氣質量使用而生成的二級污染源。

電子無負壓產品優點

1、 占室內地面范圍小。

2、 車輛涉水元器件少、面積小，電子器材傳感器元器件不主水堿雜質殘渣不良影響。

 3、 防-壓階段可按照其來排水量數據同步供壓，來太多加太多，僅有精準流量為零時才停止時。

4、 可行保養日常自來水管網的壓差受到真空引響，且設置調控靈活多變便宜。

5、 蒸汽管道電容并聯，完全根據了自來水管滲水學習壓力，機械設備工作使用率高。

6、 設配徹底封閉與電離層阻擋，為了確保水質監測受不到危害。

Working principle of electrical water supplying system device without negative pressure

  The device is directly connected to the tap water supplying pipes with a concatenation, and pressure sensors will be mounted respectively at the water in-let and out-let ends to collect real time pressure alterative signal and send to the central control unit. Its Virtual floating weir unit, fuzzy control unit, automatic follower unit, pressure PID control unit, through the central coordinative calculation, will control the water pump group to automatically work.

 Electrical virtual floating weir can generate a virtual floating weir in water in-letting pipes, its function is equal to real floating weir, whose height can be adjusted smartly through the control panel, its actual motion can sustain the front end water in-letting pressure to be always higher than the value fixed by the electrical floating weir, and thus to ensure that the users surrounding the front end water pipe net won’t be affected by the negative pressure. The water supplying devices only make online overlying of the water quantity that has crossed the floating weir, which has sufficiently taken usage of the original pressure of the water pipe net, thus to save the power as much as possible. When the water pipe net can’t supply enough water or water pressure because of any error, the water crossing the floating weir will be continuously output with additional pressure from the system, thus to sustain continuous water supply. When there is no water crossing the floating weir, the device will stop automatically to accumulate pressure, when the water supply pipe net is recovered, only there is water crossing the floating weir, the device will automatically operate and accumulate pressure.

 Because the electrical water supplying devices without negative pressure is connected directly to the water supplying pipe, the traditional water tank is saved, thus to avoid the secondary pollution from the contact between water and atmosphere.

Advantage of electrical products without negative pressure:

     1、Small area taken.

      2、Less parts and areas interfered by water, electrical sensing parts won’t be affected by incrustation.       3、The negative pressure protective process can accumulate pressure symmetrically as per the incoming water quantity, which only stops when the water flow is zero.       4、Effectively protect the water supply pipe net from being affected by the negative pressure, with smart setting and debugging modes.       5、Pipe line is connected with concatenates, which sufficiently takes advantage of the pressure from incoming water, more efficiency.       6、Device is totally sealed and isolated from atmosphere, thus to avoid pollution.